The 9 Best Floor Jacks

We spent 42 hours on research, videography, and editing, to review the top choices for this wiki. Every mechanic needs a reliable floor jack before beginning any serious repairs or modifications, and choosing the right one to fill your specific needs will make your task safer, easier, and faster. We’ve selected models suitable for a variety of applications, including getting your car, ATV, or motorcycle off the ground, so you can get your project underway. When users buy our independently chosen editorial picks, we may earn commissions to support our work.

9. Powerbuilt Triple

The versatile Powerbuilt Triple is ideal for use underneath your favorite toys, with a removable lifter cup set in the middle of a broad, rubberized platform that offers a sturdy base for smaller machines, like dirt bikes, 4-wheelers, or ride-on lawnmowers.


  • Locking safety bar prevents collapse
  • Works well with transmissions
  • Hydraulics may require maintenance















Brand Alltrade
Model 620422E
Weight 85 pounds
Rating 4.1 / 5.0

8. Goplus Low Lift

A must-have for performance drivetrain maintenance, the Goplus Low Lift has features like an extra-large base and an adjustable load plate, which are necessary for independently maneuvering heavy items such as transmissions and differentials.


  • Rust- and corrosion-resistant finish
  • Not meant for raising full vehicles
  • Rated for only half a ton















Brand Goplus
Model pending
Weight pending
Rating 4.1 / 5.0

7. Eambrite Electric

The Eambrite Electric uses a standard 12v DC outlet to create roughly 11 inches of lift with very little user effort, great for older or less physically capable drivers, or when conditions prevent the use of a traditional model.


  • Excellent for emergency situations
  • Won’t fall if it loses power
  • Not for large or challenging tasks















Brand EAMBRITE
Model pending
Weight 9.9 pounds
Rating 3.6 / 5.0

6. PowerZone Motorcycle

The PowerZone Motorcycle is among the most popular ways to raise a sport cruiser or speed bike off the ground with ease, thanks to dual rubber-topped platforms, a reliable safety lock, and a foot pump operation that keeps your hands free to balance the payload.


  • Max height of almost 15 inches
  • 1700-pound capacity
  • Has trouble fitting under some bikes















Brand Milestone Tools
Model 380047
Weight 62.4 pounds
Rating 3.7 / 5.0

5. Nos Pro Style

Thanks to excellent craftsmanship and superb quality control, the Nos Pro Style is a far cry from the cheap, generic options that come at suspiciously low prices. This professional-grade tool should hold up for quite some time, and it’ll look good while doing so.


  • 2- and 3-ton versions available
  • Lift height of over 15 inches
  • Well-built but quite costly















Brand Sunex
Model NSJ0302
Weight 60.6 pounds
Rating 4.1 / 5.0

4. Pro Eagle 2

Aimed at minimizing the pitfalls of intense off-roading, the Pro Eagle 2 is the one to have onboard your Jeep when you’re stuck or broken down, thanks to treaded, high-impact casters and a solid skid plate that keeps it from sinking into sand or mud.


  • Effective on uneven surfaces
  • 8-inch extension for larger 4x4s
  • Optional vehicle mount offered















Brand COOKE
Model pending
Weight pending
Rating 4.0 / 5.0

3. Arcan XL2T

There’s plenty of thoughtful engineering built into the Arcan XL2T, which boasts the lowest minimum clearance of all, at only 2-3/4 inches, in addition to a low center of gravity and low-drag metal wheels that help it slide easily into position.


  • Ideal for lowered vehicles
  • Quick-lifting double-pump action
  • Unmatched 21-inch range















Brand Arcan
Model XL2T
Weight 99.8 pounds
Rating 4.6 / 5.0

2. Pro-Lift F-767

The perfect companion to a variety of DIY auto repairs, the Pro-Lift F-767 isn’t intended for the biggest jobs, but alongside a good set of stands, it’s all that most home mechanics will need in order to gain access to their car’s underbody.


  • Costs well under a hundred dollars
  • Sub-4-inch minimum clearance
  • Compact and relatively lightweight















Brand Pro Lift
Model F-767
Weight 31 pounds
Rating 4.9 / 5.0

1. Hein-Werner Service Edition

Built to withstand full-time use in professional shops, the Hein-Werner Service Edition is a sound investment, albeit a sizable one, and it carries a reputation as one of the longest-lasting and most reliable models on the market.


  • Ultra-durable all-metal casters
  • Reinforced and resilient main joint
  • Commercial-quality cylinder seals















Brand Hein-Werner
Model HW93642
Weight 100 pounds
Rating 4.8 / 5.0

Finding The Right Floor Jack

A great floor jack costs a fair amount of money. But a decent floor jack — one that’s entirely suitable for most people’s needs — means spending only a modest sum. There are several marked differences between a floor jack that costs well over two hundred dollars and one that costs less than fifty, with the most obvious difference being lifting capacity. A good floor jack can lift a four thousand pound vehicle; a great floor jack can hoist seven thousand pounds with verve.

So start your search for the right floor jack by considering just what you need to jack up off the ground anyway. Consider the common pickup truck, which is often called a half ton truck. That does not mean the vehicle weighs 1000 pounds, but rather that it can competently tote that much weight in its bed. Most midrange pickups in fact weigh between 5000 and as much as 9000 pounds, meaning some of the lower cost, lower lift capacity floor jacks won’t be suitable for owners of or service stations catering to these types of vehicles.

That said, a floor jack is rarely used to lift a vehicle entirely off the ground, but rather to lift the vehicle partially. Thus a floor jack rated at lower than your vehicle’s weight may serve for simple tasks like tire changes or basic maintenance, especially when paired with a good jack stand. For many people and many purposes, a floor jack capable of lifting two tons, a common rating for these units, is more than suitable.

Taking this two ton/4000 pound lift capacity as a standard for comparison, move on to the next most important aspect of a floor jack, the lifting range. Some jacks can lift loads higher than twenty inches off the ground, while others are capable of lifting only to around twelve inches high. It will likely come as little surprise that the higher priced models tend to offer the higher lift range. However, if you only use your jack for tire changes or wheel rotations, then there’s no need for a massive lift range and the accompanying higher price tag.

Another aspect of a floor jack to consider also has to do with weight; not with the jack’s weight lifting capacity, but rather with its actual weight. A floor jack that’s to be used in an auto body shop can weigh ninety pounds — as some floor jacks do — without any issue. A jack meant to be brought along for use on the roadside for quick repairs for other impromptu purposes should weigh much less so its operator can enjoy the benefits of a truly portable tool. Many decent floor jacks weigh less than fifty pounds. A few even weigh less than twenty pounds and can be moved about quickly and with ease.

Safe And Proper Floor Jack Use

Using a floor jack is not a complex process in and of itself; you need only to make sure the handle is properly affixed to the unit and that you know how to safely lower the jack again when the lifting is done. And of course you need to never try to lift more weight than that for which your unit is rated. It’s not how you operate the jack that matters exactly, but rather how you use it. Namely, you have to use it safely.

Before using a jack, you should put on thick work gloves and protective eyewear. Also consider other protective clothing such as coveralls and knee pads. The other gear you should have on hand includes the aforementioned jack stands — as a jack is suitable for lifting a vehicle, but not for keeping it safely elevated for long periods of time — as well as a set of wheel chocks that can keep the car from rolling once it is elevated. Any wheel that will have contact with the ground while the car is being jacked upward or held up on stands should be immobilized.

Next make sure you have located a part of the vehicle that is designed to accommodate the immense weight of the car or truck being lifted. Far too many amateur car care enthusiasts have caused severe damage to their vehicles by placing a floor jack’s lifting plate under a component of the vehicle not suitable to bear its weight; improper jack placement risks damaging everything from the vehicle’s doors to its frame to its oil pan to its exhaust system. If you are unsure of where to place your floor jack, consult the vehicle’s manual and locate an appropriate spot.

If you will be using a jack on any surface other than concrete or cement, consider placing a section of plywood underneath the tool. The great weight of a car, truck, or trailer can actually push a jack down into many surfaces, such as obvious culprits such as dirt or gravel but including soft asphalt. This can not only make your jack harder to retrieve later, but can mean an unsteady and unsafe tool.

The Amazing Power Of The Floor Jack Explained

There are multiple forces and physical properties at work when a floor jack is doing its job. The most obvious physical feature of a floor jack is its use of the trusted simple machine known as the lever. The long handle attached to the jack allows a user to apply modest pressure downward but create lots of pressure upward, thereby letting a person weighing only a couple hundred pounds, give or take, to elevate a vehicle weighing many thousands of pounds.

But the lever is not working alone. A floor jack uses a hydraulic piston, meaning a piston operated by pressure created by a compressed fluid. The principal’s of Pascal’s Law, also known as the Principle of Transmission of Fluid Pressure, state that a pressure change that effects any part of an incompressible fluid in a confined space will equally effect all of said fluid.

In other words, that means that when you exert pressure to the hydraulic fluid beneath the piston in your floor jack, a lot of pressure is created in the liquid, and that pressure simply has to go somewhere. In the case of the floor jack, the only place it can go is up, no matter if there is a massive vehicle atop the piston.